Kinco MT100 / MT100E / MT100E-4G 10.1-inch HMI Panel

The Kinco MT100 family provides a 10.1-inch 1024 × 600 display within a 260 × 202 mm opening. It is a candidate when assessing a larger existing DTools operator interface and its original cabinet dimensions. MT100 has no listed Ethernet port; MT100E and MT100E-4G each list one, with cellular connectivity confined to the 4G code. Compare the old project target, network requirements and the 271 × 213 × 38 mm body before choosing.

Model codes: MT100 | MT100E | MT100E-4G

Kinco MT100 HMI Panel Overview

MT100 is a ten-inch-class operator panel group whose enclosure proportions matter as much as the display diagonal during a replacement review. Its 1024 × 600 layout can support a larger physical presentation of process information, but the existing project’s target and contents remain the starting point. Identify the machine’s current panel and operating tasks before deciding which code to investigate.

The common hardware listing includes four-wire resistive touch, 64 MB RAM and 128 MB flash. These figures establish a baseline for assessing the application rather than a promised capacity for records, recipes or graphical objects. Keep the specification and variant tables as the detailed reference. The important selection work is to relate the documented hardware to the actual cabinet, controller and project.

MT100 for Larger Existing Operator Interfaces

Consider this group when an existing DTools station needs its operator workflow assessed on a 10.1-inch screen. The wider display area may help present status and operating choices together, provided labels and controls are sized for the installed viewing distance. Review a representative production screen and a setup screen at actual size instead of judging clarity from a scaled desktop image.

An existing interface may also contain fault acknowledgments, maintenance functions and retained settings that are absent from the main overview. Document those tasks before selecting a replacement or changing the target. The familiar screen size should not conceal a different cabinet opening or communication arrangement. Where the old application is unavailable, explain what can be recovered from source files and what must be re-established with the machine owner.

MT100, MT100E and MT100E-4G Network Hardware

MT100 has no listed Ethernet, Wi-Fi or cellular connection. MT100E adds one Ethernet port and is associated with the EdgeAccess 1.0 remote platform. MT100E-4G lists one Ethernet port, cellular hardware and the same platform description. Wi-Fi is not listed for any of these three codes. Select the ordering suffix from the intended connection rather than treating all remote access as one interchangeable feature.

For MT100E-4G, the listed cellular bands include LTE-FDD 1, 3, 5 and 8; LTE-TDD 34, 38, 39, 40 and 41; UMTS 1 and 8; and GSM 3 and 8. Compare that record with the destination carrier and applicable full-code documentation. Radio hardware does not establish site coverage, service activation or a working remote session. The Wi-Fi versus 4G guide explains the access decisions that sit outside display selection.

MT100 PLC Ports and Driver Checks

Match MT100 PLC Drivers and Cable Pinout

All three codes list COM0 with RS232, RS485 or RS422, COM1 with RS485 and COM2 with RS232. Trace the existing cables and record which device each serves. A machine may use more than one connection, so proving the main PLC path does not establish that every peripheral connection can be retained. Obtain the actual pinout before judging cable reuse.

Use the PLC compatibility guide to identify CPU, firmware, communication module and DTools driver dependencies. Ethernet hardware on an E code does not prove support for a particular controller protocol. Verify a known read-only value under an approved commissioning condition first. Any write test needs the PLC engineer’s defined test point and expected result with machine interlocks effective. The communication troubleshooting guide supports investigation when the initial data check fails.

MT100 260 × 202 mm Cut-out and Body Dimensions

Measure the 260 × 202 mm Opening for MT100

The cut-out is 260 × 202 mm and the body measures 271 × 213 × 38 mm. Measure the existing opening directly, especially its height. Another panel with a similar diagonal or pixel count may require a different aperture. Also assess front-door clearance around the bezel and access to the fixing hardware.

The body depth does not include every plug projection or wire bend needed by the installed application. Request the applicable drawing to determine connector positions and mounting requirements, then assess the actual cable routes inside the cabinet. The product photograph and illustrative opening sketch are not evidence of pin assignments. Input power is DC 10.8 to 28 V; confirm the supply, polarity and grounding against installation information before connection.

DTools Software for MT100

Select the MT100 Target in DTools

Kinco DTools is listed for MT100, MT100E and MT100E-4G. Preserve the last working editable project, machine settings and software-version record before assessing another target. Use a separate copy for changes. A project that opens in the editor still needs its driver, target and application functions checked against the selected code.

The guide to DTools software for MT100 covers the software-selection process and relevant documentation questions. If only a compiled file remains, identify that limitation before assuming the screens can be edited or moved. Review alarm behavior, retained values, languages and operator navigation as part of the actual application. A screen preview can help assess presentation but cannot verify controller data or establish safe write behavior on the machine.

MT100 Existing-Panel Fit and Project Checks

The Kinco F2100E HMI Panel lists the same 260 × 202 mm opening and 1024 × 600 display. It uses Kinco DTools Pro, while MT100 uses DTools. Those common mechanical and display points make it a relevant candidate, but they do not settle the software transition. Compare the target, complete-code interfaces and body clearance before deciding whether the application can move.

The MT070 product group offers a smaller-screen comparison and the GL100 product page provides another ten-inch candidate whose own dimensions need attention. These links support investigation rather than alternative selection candidate claims. Follow the MT100 project migration checks for the broader software assessment and the HMI replacement checklist for the cabinet and commissioning evidence. Keep the physical opening and software family explicit in the selection record.

MT100 Price and Quotation Details

Request the complete code, quantity and delivery destination. State whether the application needs serial communication, wired Ethernet or a cellular connection. For MT100E-4G, provide destination and carrier requirements. If the code is undecided, explain the required network path rather than asking for a generic MT100 remote panel.

For replacement assistance, include the old label, controller identification, measured opening, rear-clearance photographs and DTools project version. Request a datasheet or manual applicable to the selected suffix and specify the topic: dimensions, power, cable wiring, target selection or cellular configuration. An individual quotation establishes commercial details; this technical page does not promise a price, stock position or fixed delivery period.

MT100 Questions and Answers

How do MT100, MT100E, MT100E-4G differ?

MT100 is the non-Ethernet option. MT100E adds Ethernet and the EdgeAccess 1.0 description; MT100E-4G also adds cellular hardware. None lists Wi-Fi.

What cut-out and rear clearance does MT100 need?

The cut-out is 260 × 202 mm and the body is 271 × 213 × 38 mm. Add connector, cable and mounting clearance using the applicable drawing.

How do I check MT100 against my PLC driver and project?

Match the exact controller, driver, target and documented connection. Validate read-only data first, and have the PLC engineer define any subsequent controlled write test.

How can I request a MT100 datasheet, manual or quotation?

Send the full code, document topic, quantity and destination. Add the existing-machine and project evidence when requesting a fit or migration review.