Kinco GL2043HE 4.3-inch HMI panel, front appearance. Use the specifications to check interfaces and panel fit.
Basic SERIES · GL2043HE
Model codes: GL2043HE
The Kinco GL2043HE provides a 4.3-inch 800 × 480 display and one Ethernet port in a 119 × 93 mm opening. It is a candidate for a compact operator station that needs wired networking, provided the page remains readable on the small screen. The listed software is DTools Pro, so compare project targets rather than assuming reuse from an older compact GL panel. Check the 132 × 102 × 33 mm body and PLC driver before ordering.
Generation: Green Series 2 - General Type (GL2) in the Basic series
For a replacement, confirm that the existing panel label reads GL2043HE and check the hardware revision.
Available for quotation — specify the full code, quantity and destination.
Supplied by CINKR. Confirm the panel cut-out, the interfaces and the protocol before ordering.
EXACT MODEL CODE
Match the full code to the PLC connection, project software and cabinet opening. An option listed for one code does not apply to every code on this page.
Check door thickness, clip access, ventilation and cable bend clearance. Compare the full variant code before reusing an opening or cable.
Request the applicable installation drawing →PRODUCT GUIDE
The Kinco GL2043HE provides a 4.3-inch 800 × 480 display and one Ethernet port in a 119 × 93 mm opening. It is a candidate for a compact operator station that needs wired networking, provided the page remains readable on the small screen. The listed software is DTools Pro, so compare project targets rather than assuming reuse from an older compact GL panel. Check the 132 × 102 × 33 mm body and PLC driver before ordering.
QUICK DECISION
BEST FIT
CHECK BEFORE ORDERING
CONSIDER ANOTHER CODE IF
The Kinco GL2043HE provides a 4.3-inch 800 × 480 display and one Ethernet port in a 119 × 93 mm opening. It is a candidate for a compact operator station that needs wired networking, provided the page remains readable on the small screen. The listed software is DTools Pro, so compare project targets rather than assuming reuse from an older compact GL panel. Check the 132 × 102 × 33 mm body and PLC driver before ordering.
Model codes: GL2043HE.
Industrial control systems depend heavily on reliable human-machine interface terminals to bridge automation logic with daily machine operations. The Kinco GL2043HE 4.3-inch HMI Panel provides plant operators and maintenance engineers with a dependable visual workstation designed specifically for industrial manufacturing environments. Rather than evaluating automation hardware purely on diagonal display size, engineers must assess display resolution, interface channel allocations, physical enclosure clearances, and the exact software runtime environment. A properly selected control terminal ensures rapid error identification, streamlined batch execution, and consistent operator workflow across demanding continuous production environments.
Operating conditions on factory floors involve electrical interference, continuous mechanical vibrations, and wide temperature swings. This industrial terminal incorporates robust electrical isolation, industrial-grade power supply conditioning, and a durable front bezel gasket that seals against dust, moisture, and cutting fluid mist. The resistive touchscreen interface guarantees dependable touch actuation whether operators use bare hands or heavy protective safety gloves. Integrating this hardware into an existing or new electrical cabinet ensures long-term operational stability and predictable control behavior across automated machinery lines.
A compact 4.3-inch operator interface is ideal for small machine tools, standalone pump controllers, and auxiliary operator stations with limited enclosure door space. The 800 × 480 widescreen resolution provides sharp graphic rendering, allowing operators to monitor system parameters, adjust setpoints, and review alarm conditions clearly despite the compact screen diagonal.
Visual ergonomics play an essential role in minimizing machine downtime during complex industrial operations. Operator screens designed for this terminal benefit from structured visual zoning where primary machine metrics, axis coordinates, and emergency interlock states remain immediately identifiable. Secondary configuration parameters, batch recipe parameters, and historical diagnostic trends are organized systematically on contextual sub-pages. By keeping critical alarms visible without cluttering operator workspaces, engineering teams build interfaces that facilitate rapid technician response and improve overall equipment effectiveness on active production lines.
Hardware specifications include an integrated 10/100M Ethernet port and two serial communication channels: COM0 (RS232/RS485/RS422) and COM2 (RS232). Operating from an industrial DC 10.8 to 28 V power supply, the unit provides 128 MB RAM, 256 MB flash storage, and a durable 4-wire resistive touch sensor configured via DTools Pro.
Internal computing hardware balances processing performance with industrial thermal dissipation requirements. High-capacity non-volatile flash storage reliably preserves operational recipes, detailed event histories, graphical symbols, and multilingual font libraries through sudden plant power failures. Dedicated graphics acceleration handles real-time trend visualization and dynamic object updates smoothly while communication tasks poll connected controllers concurrently. Automation engineers can design comprehensive machine diagnostics and data-logging routines without compromising visual refresh rates or communications responsiveness.
Achieving seamless communication between this operator interface and factory floor automation equipment requires verifying communication protocols, serial parameters, and controller addressing modes. A matching physical connector such as a standard DB9 port or an RJ45 Ethernet jack provides hardware connectivity but does not ensure software driver compatibility. Engineering teams must confirm that the specific controller CPU, firmware version, and communication card are fully supported by the configuration runtime before proceeding with on-site installation and field wiring.
Serial communication ports require precise configuration of baud rates, parity bits, stop bits, and station numbering to establish reliable data polling loops. For network-connected models, network topologies, subnet routing, and gateway parameters must be documented thoroughly. Industrial engineers should confirm whether communication links operate point-to-point or share multidrop buses with third-party instruments, ensuring that driver polling timeouts and retry counters are calibrated properly to prevent communication dropouts under high electrical noise conditions.
Cabinet installation requires a compact 119 × 93 mm rectangular cut-out. The front bezel measures 132 × 102 mm with an overall housing depth of 33 mm. Maintain at least 25 mm of rear clearance behind the enclosure door to prevent bending stress on Ethernet patch cords and DC power wiring.
Proper cabinet cut-out preparation is critical to achieving an IP65 front environmental seal. Field technicians must machine the enclosure door according to precise cutout tolerances and ensure that mounting surfaces are flat, deburred, and free of metal filings. When securing the terminal with its mounting brackets, uniform torque should be applied in opposing pairs to compress the sealing gasket evenly around the perimeter. Uneven clamping forces can distort the front bezel or pinch the internal seal, compromising long-term ingress protection against coolants and washdown sprays.
Application development uses Kinco DTools Pro software. Note that while sharing cut-out dimensions with older compact models, GL2043HE uses DTools Pro rather than legacy DTools. System engineers must select the GL2043HE target in DTools Pro and verify controller communication driver compatibility.
Project engineering and runtime configuration follow established development workflows. Integrators should refer to the Kinco HMI DTools software download guide to obtain current programming packages and verified driver libraries. For protocol integration, consult the Kinco HMI PLC compatibility guide to verify register mapping rules, and utilize the Kinco HMI PLC no response troubleshooting guide when diagnosing physical cabling, station addressing, or driver timeout faults during machine commissioning.
When evaluating replacements for older 4.3-inch panels such as GL043, review cut-out dimensions and software requirements. While physical cut-outs match at 119 × 93 mm, the resolution increases from 480 × 272 to 800 × 480, and configuration moves to DTools Pro, requiring project screen layout adjustments.
Modernizing legacy automation equipment or replacing damaged panels requires a methodical audit of dimensions, interface hardware, and project software compatibility. Review the HMI panel replacement checklist to systematically compare cut-out openings, power terminal requirements, serial pinouts, and program conversion requirements. For alternative machine design considerations or sibling model comparisons, evaluate the Kinco GL043 HMI Panel, Kinco GH043 HMI Panel, and Kinco MT043 HMI Panel to verify appropriate mechanical fit and communication capabilities.
Software conversion from legacy runtime files involves more than compiling projects for new hardware targets. Graphical objects, variable scaling, alarm groupings, and communication driver blocks must be inspected individually in the configuration software. Always retain the original unedited project backup and archive working machine parameters before executing changeover tasks. Running side-by-side bench verification with a secondary PLC confirms that numerical scaling, multi-byte word ordering, and recipe transfer operations function identically to the original equipment.
Procurement specialists should define required model quantities and project delivery timelines. Formal commercial quotations confirm product availability, technical documentation packages, and warranty terms for machine builder machinery production batches.
Industrial procurement decisions require clear verification of part numbers, expected quantities, regional logistics, and formal commercial terms. Pricing and lead-time schedules are handled via professional inquiry to ensure technical specialists verify application parameters, documentation availability, and shipment details prior to order finalization. machine builder builders and maintenance teams should submit complete machine requirements—including controller model, power supply configuration, and destination country—to receive an official quotation and comprehensive technical evaluation.
GL2043HE features a 4.3-inch 800 × 480 display and is programmed using Kinco DTools Pro software.
The mounting cut-out is 119 × 93 mm. The outer front bezel measures 132 × 102 × 33 mm. Provide adequate rear clearance for field wiring.
GL2043HE increases display resolution to 800 × 480 (compared to 480 × 272 on GL043), integrates an Ethernet port, and utilizes Kinco DTools Pro configuration software.
Submit an inquiry specifying your desired quantities and destination to receive product datasheets, user manuals, and an official commercial quotation.
SELECTION CHECKLIST
SPECIFICATIONS
Compare specifications by model code, including differences in interfaces, power requirements and dimensions.
| Model code | GL2043HE |
|---|---|
| Series | Basic series · Green Series 2 - General Type (GL2) |
| Interface summary | 1 port · 2 serial ports |
| Display | |
| Display size | 4.3" |
| Resolution | 800 × 480 |
| Display area | 95.04 × 54.71 mm (H × V) |
| Colours | 16.7 million colours |
| Viewing angle | 80/80/80/80 (T/B/L/R) |
| Contrast ratio | 1200:1 |
| Backlight | LED |
| Brightness | 500 cd/m² |
| Backlight life | 30,000 hours |
| Touch panel | 4-wire resistive |
| Hardware | |
| Processor | Quad-core ARM 1.5 GHz |
| RAM | 128 MB |
| Flash storage | 256 MB |
| USB host | 1 port |
| USB device | 1 port |
| SD card | Not offered on this model |
| Interfaces | |
| Ethernet | 1 port |
| Serial ports | COM0: RS232/RS485/RS422 · COM2: RS232 |
| CANopen | Not offered on this model |
| Wi-Fi | Not offered on this model |
| 4G | Not offered on this model |
| HDMI | Not offered on this model |
| RFID | Not offered on this model |
| Power | |
| Input power | DC 10.8 to 28 V |
| Power consumption | 2W at 24 V DC |
| Allowable power loss | < 3ms |
| Insulation resistance | > 50 MΩ at 500 VDC |
| Dielectric strength | 500 V AC for 1 minute |
| Power isolation | Not offered on this model |
| Serial port isolation | Not offered on this model |
| Mechanical | |
| Enclosure | Engineering plastic |
| Panel dimensions | 132 × 102 × 33 mm |
| Panel cut-out | 119 × 93 mm |
| Mounting | Panel mounting |
| Front protection | IP65 (front panel) |
| PCB coating | Not offered on this model |
| Environment | |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 10 to 90 % RH (non-condensing) |
| Storage temperature | -20 to 60 °C |
| Storage humidity | 10 to 90 % RH (non-condensing) |
| Vibration resistance | 10-500 Hz, 30 m/s², 1 hour each for X, Y, Z directions |
| Cooling | Natural air circulation |
| Certification and software | |
| Manufacturer-listed CE standards | Passed |
| Configuration software | Kinco DTools Pro |
| Remote maintenance | EdgeAccess 2.0 |
COMPARE RELATED PANELS
Related model codes help you avoid choosing a neighbouring size by accident. A different series or generation is not a substitute without a cut-out and port check.
| Model | Cut-out | Display | Software | Ports | Relationship |
|---|---|---|---|---|---|
| GL2043HE | 119 × 93 mm | 4.3" | Kinco DTools Pro | 1 port · 2 serial ports | Selected code |
| GL043 | GL043E | 119 × 93 mm | 4.3" | Kinco DTools | 2 serial ports · Ethernet on GL043E | Same series, different generation — check the cut-out, ports and panel depth. |
| MT043 | MT043E | 119 × 93 mm | 4.3" | Kinco DTools | 2 serial ports · Ethernet on MT043E | Same series, different generation — check the cut-out, ports and panel depth. |
| M2043H | M2043HE | 119 × 93 mm | 4.3" | Kinco DTools | 2 serial ports | Same series, different generation — check the cut-out, ports and panel depth. |
Related model codes show a size and interface comparison, not interchangeability. Confirm the cut-out, the port arrangement and the protocol before treating a neighbouring code as a replacement.
DOWNLOADS
Request the manual or dimension drawing for the full model code and hardware revision. Use the manufacturer download center for software, then check its supported target and release.
Include your full model code, revision and required document language.
Operating instructions, parameter references and panel setup information.
Model codes: GL2043HE
Panel outline, panel cut-out and depth drawing for the machine door.
Model codes: GL2043HE
Kinco DTools Pro project software; check the target and package release.
Model codes: GL2043HE
Kinco DTools Pro project software; check the target and package release.
Model codes: GL2043HE
V1.10.0.2 (Build260821) · checked 2026-10-05
Official manufacturer download centerFAQ
See product specifications and technical documentation for details.
See product specifications and technical documentation for details.
See product specifications and technical documentation for details.
See product specifications and technical documentation for details.
REQUEST A QUOTE
Tell us whether the GL2043HE is for a new machine, an upgrade or a replacement, and include the panel opening and the interfaces in use. This form only prepares your message; nothing is submitted or stored.